News

Laser drilling small holes uses high-energy-density lasers as a heat source to produce local instantaneous high temperatures at the processing point of the processed material, w...

What factors need to be considered when designing a stamping process，In a metal stamping parts processing plant, metal stamping parts that have been bent will rebound. In order ...

Matters needing attention for rust prevention of stamping parts It needs to be determined according to the specific manufacturer, processing procedures and specific needs! If t...

Common problem solving methods for stamping parts: 1. Adhesion and scratches: Defects on the surface of the workpiece or mold due to friction between the material and the punch...

Since stamping parts have developed towards large-scale and complex development, the quality requirements for stamping parts have become increasingly stringent. In order to achi...

Causes of the coiling phenomenon of stamped parts：1. Irregular damage on the edge of the material, and materials that exceed the qualified quality standards.2. When a foreign ob...

In the progressive die, the shape of the stamping parts is formed by punching the excess material around the stamping parts. The main reason for the flipping and twisting of the...

Common quality problems of metal stamping parts include: deformation, burrs, etc.; cracks, warping, surface scratches, corner deformation, etc. of bent parts; flange wrinkles, w...

Standards for precision hardware stamping parts processing.Hardware usually uses furniture plates, thick-walled tubes, thin aluminum materials, etc. as materials for hardware st...